.png?width=1050&height=450&name=Fully-Integrated%20Website%20Graphic%20(6).png)
Compare Similar Models
| ORCA-6-24V | ORCA-6-48V | |||
| Max Force | 426 N | 95.7 lbf | 638 N | 143.5 lbf |
| *Max Continuous Force | 153 N | 34 lbf | 153 N | 34 lbf |
| Max Speed | 5.3 m/s | 210 in/s | 3.6 m/s | 140 in/s |
| Position Accuracy | ±150 μm | ±0.0059 in | ±150 μm | ±0.0059 in |
| Stator Length | 175.4 mm | 6.91 in | 175.4 mm | 6.91 in |
| Standard Usable Stroke | 177.8 mm | 7 in | 177.8 mm | 7 in |
| Stroke Length Range | 1 in - 31 in | 1 in - 31 in | ||
| Shaft Length | 15 in | 15 in | ||
| View All Specifications | ||||
|
*This assumes forced air cooling and an ambient temperature of 20C. Max continuous force varies dependant on the operating environment. |
||||
Integrated Kinematics Controller for High Precision
ORCA motors empower you with cutting-edge kinematic controllers, transforming how you execute precise movements. With the ability to save up to 32 motion profiles directly to the motor, you can customize and trigger complex movements effortlessly. Whether it's through software or a simple hardware button, gain the freedom to orchestrate intricate motions with a touch. Enhance your projects with the simplicity and precision that only the ORCA-SERIES offers.
Real-time Responses with Ultra Low Latency
ORCA motors feature an internal PID control loop operating at approximately 3 kHz, with updates every 0.33 milliseconds. Integrated force and position sensing enables rapid adjustments to changing loads and motion conditions, delivering precise, responsive control without relying on external controllers. This low-latency performance is ideal for dynamic testing, robotics, and haptic applications requiring immediate feedback.
Learn More: Low-Latency and Real-Time Response in Linear Actuators
High Speed Force, Position & Performance Feedback
ORCA motors combine high-speed linear motion with integrated force and position sensing for precise, closed-loop control. The ORCA-6-24V reaches speeds up to 5.3 m/s, while delivering up to 426 N of peak force, ±1.0 N force accuracy, and ±150 μm position accuracy. Real-time feedback enables engineers to monitor and adjust motor performance throughout operation.
Environmental Protection & Durability
ORCA motors feature an IP68-rated, fully epoxy-potted design. With a single moving shaft and lubrication-free, replaceable bushings capable of exceeding 50 million cycles under low side loads, ORCA motors are engineered for reliable operation with minimal maintenance in demanding environments.
Low Voltage DC Operation
ORCA motors operate on 12–60 VDC, supporting a wide range of power sources, including AC-to-DC power supplies, batteries, and vehicle electrical systems. Their low-voltage architecture makes them well suited for mobile robotics, autonomous systems, and battery-powered applications without requiring high-voltage infrastructure. Each motor's nominal voltage is optimized for its force and speed characteristics, while higher supply voltages can increase maximum speed without increasing peak force.
Learn More: Understanding ORCA Motors Part Numbers & Voltage Requirements
Smooth Motion Without Cogging
ORCA motors feature a proprietary four-phase, air-core stator geometry that generates smooth, consistent linear force throughout the entire stroke without cogging. Their direct-drive design eliminates mechanical backlash associated with gears and lead screws, while minimizing unwanted force ripple and velocity fluctuations. This enables precise, repeatable motion and stable force output, particularly valuable in test and measurement, active stabilization, and haptic applications.
| Control Modes |
| Position Control (built-in) |
| Force Control (built-in) |
| Kinematic Control (built-in) |
| Haptic Control (built-in) |
| Supported Interfaces |
| EtherNet/IP |
| C++ |
| MATLAB |
| LabVIEW |
| Python |
| Modbus RTU |
| What's Included |
| Integrated controller |
| Force sensor |
| Position feedback |
| Configuration software |
| Communication API |
Shop Similar Models
| AFFORDABLE & HIGH SPEED | |
| ORCA-3-36V | |
![]() |
|
| 281 N | Max Force |
| 63.1lbf | |
| 64N | Max Cont Force |
| 14 lbf | |
| 5.3 m/s | Max Speed |
| 207 in/s | |
| View Product Details | |
| VERSATILE | |
| ORCA-6-48V | |
![]() |
|
| 638 N | Max Force |
| 143.5 lbf | |
| 153 N | Max Cont Force |
| 34 lbf | |
| 3.6 m/s | Max Speed |
| 140 in/s | |
| View Product Details | |
| HIGH SPEED & SUSTAINED FORCE | |
| ORCA-12-12V | |
![]() |
|
| 426 N | Max Force |
| 95.7 lbf | |
| 301 N | Max Cont Force |
| 68 lbf | |
| 5.3 m/s | Max Speed |
| 210 in/s | |
| View Product Details | |
TAILORED TO YOUR APPLICATION
Customize Your ORCA Motor
![]() |
![]() |
![]() |
![]() |
| Metric or Imperial | Custom Shaft Length | We'll Write Your Code | Add Accessories |
| Motors are available in both metric (mm) and imperial (in) configurations | The shaft is customizable in whole inch increments up to 40 inches | Custom software integration services are available | Choose from rear shaft covers, mounting hardware, and more |
Orca 6 Versus The Orca 15
See the difference between Orca 6 Series optimized for 24V or 48V and the Orca 15-48V.



![A punch press using a ORCA™ Series Smart Linear Motor to engage a punch press petal. [GIF] A punch press using a ORCA™ Series Smart Linear Motor to engage a punch press petal. [GIF]](https://irisdynamics.com/hs-fs/hubfs/AD9A2063-ezgif.com-optimize-1.gif?width=800&height=450&name=AD9A2063-ezgif.com-optimize-1.gif)

.png?width=1050&height=600&name=Copy%20of%20Playing%20with%20Business%20Cards%20(1).png)
.png?width=352&height=201&name=Copy%20of%20Playing%20with%20Business%20Cards%20(3).png)





